Physics & Astronomy Faculty Publications
Hydroxide-Based Nanoenergetic Materials
Document Type
Article
Publication Date
4-1-2019
Abstract
Hydroxide-aluminum based nano-energetic materials are new class of thermites which demonstrated high theoretical energy capacity of up to 50 kJ cm −3 . Most of the hydroxide-aluminum based systems exhibit a large gas generation (greater than two liters per gram) and high adiabatic combustion temperature (up to 3000 K), which ensures performance that attributes significantly for applications such as solid fuel propulsion, explosives, airbag deployment, etc. Thermodynamic calculations performed for a collection of 16 novel hydroxide-based nano-thermite systems show that most of the systems are stable. Four systems, based on bismuth, copper, nickel and cerium hydroxides, were mixed with aluminum to prepare nano-thermites compositions. These formulations were tested to estimate the heat generation and pressure discharge values during the ignition. These systems were stable below ignition temperature, between 570–600 °C. The strongest performance was recorded for Al−Bi(OH) 3 formulation with 5.6 kPa*m 3 g −1 peak pressure, which is comparable to highest values reported in literature.
Recommended Citation
Yolchinyan, Srbuhi A., Ryker W. Eads, Mkhitar A. Hobosyan, and Karen S. Martirosyan. "Hydroxide‐Based Nanoenergetic Materials." Propellants, Explosives, Pyrotechnics 44, no. 4 (2019): 464-471. https://doi.org/10.1002/prep.201800232
First Page
464
Last Page
471
Publication Title
Propellants Explosives Pyrotechnics
DOI
10.1002/prep.201800232

Comments
© 2019 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim