Theses and Dissertations

Date of Award

8-1-2026

Document Type

Thesis

Degree Name

Master of Science (MS)

Department

Mechanical Engineering

First Advisor

Dumitru Caruntu

Second Advisor

Weiguang Yang

Third Advisor

Linfeng Wu

Abstract

This thesis investigates the effects of external loading, running speed, and fatigue on knee kinematics during running using marker-based motion capture and Joint Coordinate System (JCS) clinical-angle analysis. Motion data were collected using a nine-camera Vicon system and reflective markers to quantify knee flexion/extension, abduction/adduction, and internal/external rotation throughout the gait cycle during weighted running, continuous running at different speeds, and running following a 90-squat fatigue protocol. Results showed that increasing external loading was associated with reduced peak knee flexion in some subjects, with Subject 1 decreasing from approximately 73° to 60° under the 13.61 kg load. Increasing running speed from 4 MPH to 6 MPH increased peak swing-phase flexion, with Subject 3 increasing from approximately 83° to 92°. Fatigue-related effects produced smaller sagittal-plane changes but more individualized frontal- and transverse-plane responses, including adduction values approaching −12° and rotational magnitudes approaching −33°. Comparisons between simulated obesity and a naturally obese participant demonstrated different kinematic responses despite similar body-mass conditions. The Joint Coordinate System successfully quantified continuous three-dimensional knee motion across all experimental conditions. These findings demonstrate that loading, speed, and fatigue influence knee clinical angles in distinct ways and emphasize the importance of subject-specific responses during running.

Comments

Copyright 2026 Eric Rodriguez. All Rights Reserved. https://proquest.com/docview/3409016475

Share

COinS