Missouri Pacific Brownsville Depot Plans - Floor plan, Platform shed beams, and Rafters detail

Creator

David N. Currey

Identifier

Brownsville MP Depot Series 4 Floor Plan Shed Beams and Rafters Revision D 02-26-17

Files

Creation Date

2-17-2017

Disciplines

Architecture

Description

Computer drawing. The scale is 24 pixels to the foot . When measuring on a printout, measure from the center of one 3-pixel width line to the center of another such line. If the line is 1 pixel in width , that is the center of the line. When using the selection tool in Microsoft Paint to measure with, start on the center of a line, and drag the sliding rectangle until it is on the pixel one short of, not on, the center of the second line.

Pastel color indicates roof area with slope designated by arrow. "A" Beams: These are set 2" lower than standard green beams due to valley in roof. "B" Beam: This beam is set 4" lower than standard green beams due to being the lowest beam in the valley in roof. Note that the front wall of the main waiting room is narrower than the front pavilion wall. Note that the front wall of the auxiliary waiting room area is narrower than the front wall of the waiting room , but wider than the right wall of the auxiliary waiting room area.

© 2017 David N. Currey

Physical Description

.BMP, 29.2 MB

Recommended Citation

Missouri Pacific Brownsville Depot Collection, UTRGV Digital Library, The University of Texas – Rio Grande Valley. Accessed via https://scholarworks.utrgv.edu/mopacbrownsville