Submissions from 2021
Tunable CsPb(Br/Cl)3 perovskite nanocrystals and further advancement in designing light emitting fiber membranes, Sk Shamim Hasan Abir, Santosh K. Gupta, A. Ibrahim, Bhupendra B. Srivastava, and Karen Lozano
Improvement of Printing Quality for Laser-induced Forward Transfer based Laser-Assisted Bioprinting Process using a CFD-based numerical model, Jie Qu, Chaoran Dou, Ben Xu, Jianzhi Li, Zhonghao Rao, and Andrew Tsin
Defect detection in freight railcar tapered-roller bearings using vibration techniques, Constantine Tarawneh, Joseph Montalvo, and Brent Wilson
Submissions from 2020
The Performance of SiO2 and TiO2 Nanoparticles as Lubricant Additives in Sunflower Oil, Vicente Cortes, Karen Sanchez, Mataz Alcoutlabi, and Javier A. Ortega
Optimization of Railroad Bearing Health Monitoring System for Wireless Utilization, Jonas Cuanang, Constantine Tarawneh, Martin Amaro Jr., Jennifer Lima, and Heinrich D. Foltz
Luminescent PVDF nanocomposite films and fibers encapsulated with La2Hf2O7:Eu3+ nanoparticles, Santosh K. Gupta, Carlos Hernandez, Jose P. Zuniga, Karen Lozano, and Yuanbing Mao
The Use of Succinonitrile as an Electrolyte Additive for Composite-Fiber Membranes in Lithium-Ion Batteries, Jahaziel Villarreal, Roberto Orrostieta Chavez, Sujay A. Chopade, Timothy P. Lodge, and Mataz Alcoutlabi
Experimental Study on Plugging Behavior of Degradable Fibers and Particulates within Acid-etched Fracture, Lufeng Zhang, Fujian Zhou, Wei Feng, Maysam Pournik, Zhun Li, and Xiuhui Li
Hybrid phase-change Lattice Boltzmann simulation of vapor condensation on vertical subcooled walls, Wandong Zhao, Yuan Gao, Ruijie Li, Songgang Qiu, Yin Zhang, and Ben Xu
Submissions from 2019
Experimental study of condensation in a thermoacoustic cooler with various 3D printed regenerators using water vapor as the working fluid, Aibek Bekkulov, Andrew Luthen, and Ben Xu
Investigation into the thermodynamics and kinetics of the binding of Cu2+ and Pb2+ to TiS2 nanoparticles synthesized using a solvothermal process, Jesus Cantu, John Valle, Kenneth Flores, Diego Gonzalez, Carolina Valdes, Jorge Lopez, Victoria Padilla, Mataz Alcoutlabi, and Jason Parsons
Evaluating the Rheological and Tribological Behaviors of Coconut Oil Modified with Nanoparticles as Lubricant Additives, Vicente Cortes and Javier A. Ortega
Multidirectional Pin-on-Disk Testing Device to Evaluate the Cross-shear Effect on the Wear of Biocompatible Materials, Vicente Cortes, Carlos A. Rodriguez Betancourth, Javier A. Ortega, and Hasina Huq
Design and Validation of A Modular Instrument to Measure Torque and Energy Consumption in Industrial Operations, Mary De La Cruz, Ramiro Gonzalez, Jesus A. Gomez, Atilano Mendoza, and Javier A. Ortega
Novel Silica Filled Deep Eutectic Solvent Based Nanofluids for Energy Transportation, Changhui Liu, Hui Fang, Xinjian Liu, Ben Xu, and Zhonghao Rao
Estimating the Outer Ring Defect Size and Remaining Service Life of Freight Railcar Bearings Using Vibration Signatures, Joseph Montalvo, Constantine Tarawneh, Jennifer Lima, Jonas Cuanang, and Nancy De Los Santos
Electrical Properties and Electromagnetic Interference Shielding Effectiveness of Interlayered Systems Composed by Carbon Nanotube Filled Carbon Nanofiber Mats and Polymer Composites, Claudia A. Ramirez-Herrera, Homero Gonzalez, Felipe de la Torre, Laura Benitez, Jose G. Cabanas-Moreno, and Karen Lozano
Sub-Optimal Tracking in Switched Systems With Controlled Subsystems and Fixed-Mode Sequence Using Approximate Dynamic Programming, Tohid Sardarmehni and Xingyong Song
Energy and exergy analysis of a novel multiple-effect vapor chamber distillation system for high-salinity wastewater treatment, Hamidreza Shabgard, Ramkumar Parthasarathy, and Ben Xu
An investigation into wayside hot-box detector efficacy and optimization, Constantine Tarawneh, James Aranda, Veronica Hernandez, Stephen Crown, and Joseph Montalvo
Prognostics Models for Railroad Tapered Roller Bearings with Spall Defects on Inner or Outer Rings, Constantine Tarawneh, Jennifer Lima, Nancy De Los Santos, and Robert Jones
Pressure effect on an ocean-based humidification-dehumidification desalination process, Yingchen Yang
Simulation of droplet impacting a square solid obstacle in microchannel with different wettability by using high density ratio pseudopotential multiplerelaxation- time (MRT) lattice Boltzmann Method (LBM), Wandong Zhao, Ying Zhang, Wenqiang Shang, Zhaotai Wang, Ben Xu, and Shuisheng Jiang
Centrifugally Spun α-Fe2O3/TiO2/Carbon Composite Fibers as Anode Materials for Lithium-Ion Batteries, Luis Zuniga, Gabriel Gonzalez, Roberto Orrostieta Chavez, Jason C. Myers, Timothy P. Lodge, and Mataz Alcoutlabi
Submissions from 2018
Texas Sour Orange Juice Used in Scaffolds for Tissue Engineering, Mandana Akia, Nataly Salinas, Cristobal Rodriguez, Robert Gilkerson, Luis A. Materon, and Karen Lozano
Use of the Wilshire Equations to Correlate and Extrapolate Creep Data of HR6W and Sanicro 25, Vito Cedro III, Christian Garcia, and Mark Render
Use of the Wilshire Equations to Correlate and Extrapolate Creep Data of Inconel 617 and Nimonic 105, Vito Cedro III, Christian Garcia, and Mark Render
Developing and Testing an Electronic Homework System to Improve Student Engagement and Learning in Engineering Thermodynamics, Stephen Crown, Constantine Tarawneh, and Jazmin Ley
Vibration-Based Defect Detection for Freight Railcar Tapered-Roller Bearings, Joseph Montalvo, Constantine Tarawneh, and Arturo A. Fuentes
Submissions from 2016
Parametric analysis of a solid oxide fuel cell auxiliary power unit operating on syngas produced by autothermal reforming of hydrocarbon fuels, Jun Dong, Xinhai Xu, Ben Xu, and Shuyang Zhang
Submissions from 2015
Nanofiber-Based Membrane Separators for Lithium-ion Batteries, Mataz Alcoutlabi, Hun Lee, and Xiangwu Zhang
Structural integrity of conventional and modified railroad bearing adapters for onboard monitoring, Joseph Montalvo, Alexis Trevino, Arturo A. Fuentes, and Constantine Tarawneh
Fabrication of cellulose fine fiber based membranes embedded with silver nanoparticles via Forcespinning, Fenghua Xu, Baicheng Weng, Luis A. Materon, Anxiu Kuang, Jorge A. Trujillo, and Karen Lozano
Submissions from 2014
Fabrication and characterization of silver- and copper-coated Nylon 6 forcespun nanofibers by thermal evaporation, Dorina M. Mihut, Karen Lozano, and Heinrich D. Foltz
Submissions from 2013
Experimental study of nanofiber production through forcespinning, Simon Padron, Arturo Fuentes, Dumitru Caruntu, and Karen Lozano
Submissions from 2012
Adding Autonomic Healing Capabilities to Polyethylene Oxide, Dorina M. Chipara, Maritza Flores, Alma Perez, Nancy Puente, Karen Lozano, and Mircea Chipara
Electrospun carbon nanofibers decorated with various amounts of electrochemically-inert nickel nanoparticles for use as high-performance energy storage materials, Liwen Ji, Zhan Lin, Mataz Alcoutlabi, Ozan Toprakci, Yingfang Yao, Guanjie Xu, Shuli Li, and Xiangwu Zhang
Submissions from 2011
Polarization sensitive near-complete reflection from photonic crystal slab in centered rectangular lattice, Simon Padron, Kris Ohlinger, Karen Lozano, and Yuankun Lin
Synthesis and Characterization of Poly(butylene Oxide) Grafted Carbon Nanofibers, Carlos Ramos, Ram Thapa, Karen Lozano, Mircea Chipara, Domingo Ferrer, and Jose J. Gutierrez
Submissions from 2010
Development and Implementation of An Introduction To Stem Course For Dual-Enrollment Programs, Horacio Vasquez, Arturo Fuentes, Javier Macossay-Torres, Martin W. Knecht, and Robert Freeman
Submissions from 2009
Investigation of the electromagnetic interference shielding of titanium carbide coated nanoreinforced liquid crystalline polymer, Karen Lozano, Lesly Espinoza, K. Hernandez, Ananta R. Adhikari, Gangaram Radhakrishnan, and P. M. Adams
Phase tunable holographic fabrication for three-dimensional photonic crystal templates by using a single optical element, Di Xu, Kevin P. Chen, Ahmad Harb, Daniel Rodriguez, Karen Lozano, and Yuankun Lin
Submissions from 2008
Holographic fabrication of photonic crystals using multidimensional phase masks, Yuankun Lin, Ahmad Harb, Daniel Rodriguez, Karen Lozano, Di Xu, and K. P. Chen
Submissions from 2006
The effect of the shear-thickening transition of model colloidal spheres on the sign of N1 and on the radial pressure profile in torsional shear flows, M. Lee, Mataz Alcoutlabi, J. J. Magda, C. Dibble, M. J. Solomon, X. Shi, and G. B. McKenna
Submissions from 2005
Fabrication of magnetic hollow silica nanospheres for bioapplications, L. Shao, Dumitru Caruntu, J. F. Chen, C. J. O'Connor, and W. L. Zhou
Submissions from 2003
Near-field calculations for a rigid spheroid with an arbitrary incident acoustic field, John P. Barton, Nicholas L. Wolff, Haifeng Zhang, and Constantine Tarawneh